Parallels Mac Management - Release notes

Discussion in 'Parallels Mac Management for Microsoft SCCM' started by Maria@Parallels, Mar 11, 2016.

Thread Status:
Not open for further replies.

  1. Parallels Mac Management v8.7.2 Hotfix 2 for Microsoft SCCM (build PMA2012-8.7.2.4) has been released on March 19, 2021.

    Parallels Mac Management v8.7.2 Hotfix 4 for Microsoft SCCM (build PMA2012-8.7.2.4)
    includes the following improvements and fixes:

    Fixed an issue when Parallels Mac Client could crash when initiating policy retrieval from SCCM Console if there were no users logged in on that Mac.
    • A new root certificate is now used in connections to Apple Push Notification service servers. See details in https://developer.apple.com/news/?id=7gx0a2lp.
    Fixed an issue when the migration of a PMM installation to a new SCCM infrastructure could fail in some cases.
    Fixed an issue when Parallels Mac Client could not be installed after the DEP enrollment in some cases.
    Fixed an issue when Parallels Mac Client could not be installed on macOS 11 Big Sur after the MDM enrollment in some cases.

    Parallels Mac Management v8.7 for Microsoft SCCM (build PMA2012-8.7.0.20)
    is the initial release of the tools (a set of PowerShell scripts), which automate the most tedious tasks or preparing a corporate environment to install and configure PMM server components.
    It includes the following new features:

    • Creating certificate template for Parallels Configuration Manager Proxy in PKI mode.
    • Creating certificate template for Parallels Mac Clients in PKI mode.
    • Configuring permissions required for runningParallels Configuration ManagerProxy Configuration Wizard.
    • Configuring permissions required for runningParallels Configuration ManagerProxy.

    Parallels Mac Management v8.7 for Microsoft SCCM (build PMA2012-8.7.0.17) includes the following new features:
    • Support for user configuration profile deployment on macOS 11 Big Sur.
      Note: To enable user-level MDM for Macs enrolled in Parallels MDM before upgrading to PMM v8.7, please follow the instructions in this KB article: https://kb.parallels.com/125248.
    • Support for HTTP/2-based APNs provider API in Parallels MDM.
    • Support for Microsoft Configuration Manager 2010.
    Parallels Mac Management v8.7 for Microsoft SCCM (build PMA2012-8.7.0.17) includes the following improvements and fixes:
    • Fixed an issue when Parallels ConfigMgr Proxy would not start when VPN boundary is configured in SCCM.
    • Fixed an issue when configuration profiles could not be installed via Parallels MDM on a Mac in a secondary SCCM site in some cases.
    • Fixed an issue when a VPP application could not be installed on a Mac in a secondary SCCM site in some cases.
    • Fixed an issue when Parallels Mac Client would crash during the installation of a VPP application on a Mac in a secondary SCCM site in some cases.
    • Fixed an issue when Parallels ConfigMgr Proxy was consuming a significant amount of CPU in some cases.
    • Fixed an issue when Parallels Mac Client would create duplicate records in its logs about the MDM profile installation in macOS 11 Big Sur.
    • Fixed an issue when the MDM Enrollment Properties window would close unexpectedly if Parallels ConfigMgr Proxy wasn't running.
    • Fixed an issue with the Prerequisites Check page being empty when running the Parallels ConfigMgr Proxy Configuration Utility in some cases.

    Parallels Mac Management v8.6 for Microsoft SCCM build PMA2012-8.6.0.33 (November 13, 2020)
    Parallels Mac Management v8.6 for Microsoft SCCM (build PMA2012-8.6.0.33) includes the following new features:

    • Support for macOS 11 Big Sur:
      • Note: MDM enrollment is mandatory for Mac computers running macOS 11 for the configuration profiles deployment, because they will be deployed using MDM starting from Big Sur.
      • Note: User configuration profiles deployment is not yet supported for Big Sur, support will be added in next releases.
    • Support for Microsoft Configuration Manager 2006.
    • Ability to enforce the specific version of TLS used by Parallels Mac Management components in their communication.
    Parallels Mac Management v8.6 for Microsoft SCCM (build PMA2012-8.6.0.33) includes the following improvements and fixes:
    • Fixed an issue when it was not possible configure the Configuration Manager Proxy if Parallels MDM service was unable to connect to Apple Push Notification Services.
    • Fixed the misleading warning message telling that deactivation of Mac management license will lead to inability to manage Apple mobile devices.
    • Fixed an issue when it was impossible to re-enroll an Apple mobile device in Parallels MDM if the device was reset to factory setting without prior de-enrollment from Parallels MDM.
    • Fixed an issue when Parallels MDM Policy service was not able to connect to Parallels MDM server if it was running under a custom account.
    • Fixed an issue when Parallels Configuration Manager Proxy was crashing when a Mac was connecting from Internet in some cases.
    • Fixed an issue when it was not possible to enable FileVault 2 with mobile account on Macs running macOS 10.13.
    • Fixed an issue when the incorrect license status was displayed after the license activation until Parallels Configuration Manager Proxy is restarted in some cases.
    • Fixed an issue when some dialogs of Parallels Mac Client were displayed in low resolution on retina displays.
    Parallels Mac Management v8.5 for Microsoft SCCM (build PMA2012-8.5.0.108) (June 24,2020)
    Parallels Mac Management v8.5 for Microsoft SCCM (build PMA2012-8.5.0.108)
    includes the following new features:

    1. Support for Apple mobile devices (iOS/iPadOS) in the Configuration Manager:
    • User-initiated MDM enrollment.
    • Reporting hardware inventory.
    • Deploying Configuration Profiles.
    • Remote Wipe and Lock.
    2. Support for "Uninstall" deployment type for applications, including VPP applications.
    3. Reporting of device serial numbers as device properties and in hardware inventory.
    4. Reporting of MDM user-approval status for Mac computers.
    5. MDM now is integrated with Microsoft IIS for better security and scalability.
    6. Support for wildcard SSL certificates for MDM and IBCM.

    Parallels Mac Management v8.5 for Microsoft SCCM (build PMA2012-8.5.0.108) includes the following improvements and fixes:

    • Fixed an issue when it was not possible to create a VPP application if the ConfigMgr Console was configured with non-English locale.
    • Fixed an issue when Mac client from Secondary Site would connect to Primary Site.
    • Fixed an issue when the upgrade to macOS 10.15 Catalina using software distribution was prompting for admin credentials on Mac computer.

    Please note that you if you managed Mac computers using MDM with previous version of Parallels Mac Management, you may need to migrate the older MDM data to the Parallels Mac Management v8.5.



    Parallels Mac Management v8.1.3 Update 1 Hotfix 3 for Microsoft SCCM build PMA2012-8.1.3.10 (May 8, 2020)
    Parallels Mac Management v8.1.3 Update 1 Hotfix 3 for Microsoft SCCM (build PMA2012-8.1.3.10) includes the following improvements and fixes:

    • Fixed an issue when some Parallels Mac Management dialogs were not working in the console of SCCM 2002.
    • Fixed an issue when Parallels Mac Client could crash when the software update scan cycle failed because of a timeout in some cases.
    • Fixed an issue when an incorrect Apple software updates status was reported to SCCM if the software updates scan has failed in some cases.
    • Fixed an issue when the Parallels Configuration Manager Proxy could not be configured after the upgrade to version 8.1 in rare cases.
    • Fixed an issue when it was not possible to enroll a Mac computer into SCCM over a VPN connection in some cases.
    • Fixed an issue when the Apply OS X Image step was failing when deploying macOS 10.12 in some cases.
    • Fixed an issue when setting task sequence variables was failing in some cases.
    • The pma_agent.log file no longer contains an excessive amount of log records about access to its database.
    • The pma_agent.log file no longer contains misleading records with "Error opening database: out of memory" and "Driver not loaded" text.

    Parallels Mac Management v8.1.2 Update 1 Hotfix 2 for Microsoft SCCM build PMA2012-8.1.2.1(January 27, 2020)

    includes the following improvements and fixes:

    • Fixed an issue when task sequence execution was not continued automatically after macOS deployment, until user logged in manually, on macOS 10.15 Catalina.
    • Fixed an issue when the Parallels Mac clients could not correctly identify the assigned SCCM site in multi-site SCCM infrastructure in rare cases.
    • Fixed an issue when the Parallels SCCM Proxy could not write to the log files after the server restart in rare cases.

    Parallels Mac Management v8.1.1 Update 1 Hotfix 1 for Microsoft SCCM build PMA2012-8.1.1.2 (November 27, 2019)
    Parallels Mac Management v8.1.1 Update 1 Hotfix 1 for Microsoft SCCM (build PMA2012-8.1.1.2) includes the following improvements and fixes:

    • Fixed an issue when Parallels Configuration Manager Proxy was crashing after an upgrade to version 8.1 in rare cases.
    • Fixed an issue when Parallels Mac Client was causing high CPU usage in some cases.
    • Fixed an issue when Parallels Mac Client was not getting the correct management points for its location when connected using a VPN tunnel in some cases.

    Parallels Mac Management v8 Update 1 for Microsoft SCCM build PMA2012-8.1.0.14 (November 7, 2019)
    Parallels Mac Management v8.1 Update 1 for Microsoft SCCM (build PMA2012-8.1.0.14) includes the following new features:

    • New task sequence step: Kernel Extensions.
    Improvements and fixes:
    • Fixed an issue when Parallels Mac Client was crashing on a Mac connected to the corporate network via VPN in some cases.
    • Fixed an issue when the scanning of Apple software updates was failing with the "Unknown version format" error on macOS 10.15 in some cases.
    • Fixed an issue when specific Apple software updates were not installed in some cases.
    • Fixed an issue when adding or removing VPP token was freezing in SCCM Console when Parallels VPP service was not started.
    • Fixed an issue when Parallels VPP service was crashing when Parallels DEP service was not started.
    • Fixed an issue when Parallels Mac Client stopped trying to download new policies after several failed attempts until a Mac restart.
    • Fixed an issue when Parallels Mac Client was unable to configure Parallels Desktop v15 and its virtual machines.
    • Fixed an issue when Parallels NetBoot server was crashing after an upgrade in some cases.
    • Fixed an issue when Parallels ConfigMgr Proxy was unable to install Parallels Mac Client on Macs found by Network Discovery when there were several accounts on a Mac, some of which with no administrative rights, in some cases.
    Parallels Mac Management v8 for Microsoft SCCM build PMA2012-8.0.0.94(October 2, 2019)
    Parallels Mac Management v8.0 for Microsoft SCCM (build PMA2012-8.0.0.94) includes the following new features:

    • Support for Apple Volume Purchase Program.
    • Ability to report custom inventory data.
    • New task sequence step "Install Configuration Profile using MDM".
    • Support for Active Directory Red Forest design (a.k.a. Enhanced Security Administrative Environment).
    • IPv6 support.
    Improvements and fixes:
    • Fixed an issue when the "Automatic Mac Client Upgrade" tab was absent in the "Hierarchy Settings Properties" dialog in SCCM 1810.
    • Fixed an issue when a software update installation was failing on macOS 10.14 with "Installation failed: Cannot open updates index file '/Library/Updates/index.plist' (Operation not permitted)".
    • Fixed an issue when Parallels IBCM Proxy didn't work on Windows Server with no OpenSSL installed.
    • Fixed an issue when Parallels Mac Client wasn't working properly with custom Apple Software Updates catalogs in some cases.
    • Fixed an issue when the "Apply OS X Image" task sequence step was failing on macOS 10.14 in some cases.
    • Fixed an issue when software installation was failing in some cases if the "Allow users to view and interact with the program installation" option was selected.
    • Fixed an issue when Parallels NetBoot Server didn't work correctly on Windows Server 2016.
    • Fixed an issue when Parallels SCCM Proxy was crashing when Mac Client tried to register through Parallels IBCM Proxy configured in HTTP mode.
    • Fixed an issue when the "Prompt user to approve the MDM profile" option was not turned ON by default in the automatic MDM enrollment configuration settings.
    • Fixed an issue when the Parallels Mac Client installation package was repeatedly redeployed to DPs every hour in some cases.
    • Fixed an issue when applications were not shown in Parallels Application Portal if the "Operating system" requirement was set to "Mac OS X 10.14".
    • Fixed an issue when Parallels SCCM Proxy would begin consuming memory and eventually crash in some cases.
    • Fixed an issue when the "Capture OS X Image" step was failing if the path to the network share had spaces in it.
    Parallels Mac Management v7.3.3 Update 3 Hotfix 3 for Microsoft SCCM build PMA2012-7.3.3.4 (June 14, 2019)
    Parallels Mac Management v7.3.3 Update 3 Hotfix 3 for Microsoft SCCM (build PMA2012-7.3.3.4)
    includes the following improvements and fixes:
    • Fixed an issue when the "Apply OS X Image" step was failing if Setup Assistant was started after the macOS image deployment in some cases.
    • Fixed an issue when Parallels OSDImageBuilder did not work in some cases.

    Parallels Mac Management v7.3.2 Update 3 Hotfix 2 for Microsoft SCCM build PMA2012-7.3.2.7 (May 22, 2019)
    Parallels Mac Management v7.3.2 Update 3 Hotfix 2 for Microsoft SCCM (build PMA2012-7.3.2.7)
    includes the following improvements and fixes:
    • Fixed an issue when IBCM Proxy URL was not set for Parallels Mac Client when Mac was enrolled using Apple DEP.
    • Fixed an issue when the "Automatic Mac Client Upgrade" tab was not present in the "Hierarchy Settings Properties" dialog in SCCM 1810.
    • Fixed an issue when Mac Client was unable to download policies if the only enabled version of TLS was 1.2.
    • Fixed an issue when non-OSD task sequences were failing in some cases.
    Parallels Mac Management v7.3.1 Update 3 Hotfix 1 for Microsoft SCCM build PMA2012-7.3.1.1 (January 16, 2019)
    Parallels Mac Management v7.3.1 Update 3 Hotfix 1 for Microsoft SCCM (build PMA2012-7.3.1.1)
    includes the following improvements and fixes:
    • Fixed an issue when Parallels Mac Client was unable to install software updates on macOS 10.14 in some cases.
    Parallels Mac Management v7.3 Update 3 for Microsoft SCCM (build PMA2012-7.3.0.18) includes the following improvements and fixes:

    · Added support for user-approved MDM enrollment.
    · Added support for signed MDM enrollment profiles.
    · Added ability to deploy configuration profiles via MDM.
    · Fixed an issue when the Capture OS X Image step was failing due to inability to mount network share if a password used for mounting contained spaces or other special characters.
    · Fixed an issue when PKI certificates for Parallels SCCM Proxy and Parallels Mac Client were not re-issued automatically after changing the currently used Certification Authority to a different one.

    Parallels Mac Management v7.2.1 Update 2 Hotfix 1 for Microsoft SCCM build PMA2012-7.2.1.5 (November 22, 2018)
    Parallels Mac Management v7.2.1 Update 2 Hotfix 1 for Microsoft SCCM (build PMA2012-7.2.1.5)
    includes the following improvements and fixes:
    • Fixed an occasional issue when the application/software package installation with mandatory user log-off was getting stuck on the "Pending installation" status until the Mac computer was restarted.
    • Fixed an occasional issue when the package installation was getting stuck if there was no logged in user.
    • In rare cases, a user was not prompted whether to proceed with the installation of a software package if the installation required administrative rights.

    Parallels Mac Management v7.1 Update 2 for Microsoft SCCM build PMA2012-7.2.0.18 (October 26, 2018)
    Parallels Mac Management v7.2 Update 2 for Microsoft SCCM (build PMA2012-7.2.0.18) includes the following new features:

    • Added the ability to register Mac computers in SCCM from the Internet.
    • Added support for Parallels MDM server to work behind an HTTPS proxy.
    Improvements and fixes:
    • Fixed an issue when only the current user was shown in the list of users allowed to unlock a FileVault2 encrypted disk in macOS 10.13-10.14.
    • Apple DEP enrollment was not working in some cases.
    • In some cases, the status of a failed software package installation was reported as "In progress".
    • In some cases, unnecessary warnings were added to the MP_Hinv.log file when collecting the hardware inventory.
    • The Parallels Problem Report utility was not installed with Parallels IBCM Proxy component.
    • In rare cases, Parallels SCCM Proxy was crashing when registering new Mac clients.

    Parallels Mac Management v7.1 Update 1 for Microsoft SCCM build PMA2012-7.1.0.30 (September 26, 2018)
    Parallels Mac Management v7.1 Update 1 for Microsoft SCCM (build PMA2012-7.1.0.30)
    includes the following new features:
    • Added support for macOS 10.14 Mojave.
    Improvements and fixes:
    • Changed minimum requirements for .Net from v3.5 to v4.0.
    • "Set Variable" step was failing when executing non-OSD task sequences.
    • "Join Domain" step was failing with the error "Unable to decrypt" when executing non-OSD task sequence in PKI-enabled environments.
    • Parallels Mac Client was crashing while executing non-OSD task sequence if Parallels Proxy was unreachable.
    • It was not possible to activate Parallels Mac Management on SCCM with TLS 1.2 enabled.
    • "Required" and "Installed" statuses of the Apple software updates were not displayed in SCCM.
    • FileVault 2 encryption status was reported incorrectly for Mac computers equipped with T2 chip.
    • In rare cases, Parallels Mac Client was crashing while installing multiple software packages, applications, and task sequences at once.
    • Subsequent prompts to turn on the required FileVault 2 encryption weren't shown to the Mac users if they cancelled the first prompt and then rebooted the Mac.
    • Software packages with postponed installation prevented other packages to start their installation.
    • In rare cases, a Mac user was prompted to re-register Parallels Mac Client if several attempts to connect to Parallels Proxy had failed.
    • The Install Application dialog didn't show up for required application even if it was configured to display all notifications, making it impossible to postpone the installation.
    • Recovery partition was copied twice when creating a NetRestore image for OS deployment.

    Parallels Mac Management v7.0.3 Hotfix 3 for Microsoft SCCM build PMA2012-7.0.3.1 (August 13, 2018) includes a fix to the following issue:

    • Configuration of Parallels ConfigMgr Proxy may fail if SCCM Microsoft SQL Server is configured to use TLS 1.2.

    Parallels Mac Management v7.0.2 Hotfix 2 for Microsoft SCCM (build PMA2012-7.0.2.1) includes a fix to the following issue:

    • The Parallels MDM service would not work under a non-privileged account.
    Parallels Mac Management v7.0.1 Hotfix 1 for Microsoft SCCM build PMA2012-7.0.1.119 (June 22, 2018) includes a fix to the following issue:
    • Parallels ConfigMgr Proxy cannot be configured if the SCCM database name is not the default name.
    Parallels Mac Management v7.0 for Microsoft SCCM build PMA2012-7.0.0.116 (June 13, 2018) includes the following new features:
    • Support for Internet-based management for Mac computers
    • Non-OSD Task Sequences
    • Offline macOS imaging from an external USB drive
    • New installer with support for in-place upgrade scenarios
    • Ability to send hardware inventory reports from Mac computers
    Parallels Mac Management v7.0 for Microsoft SCCM (build PMA2012-7.0.0.116) includes the following improvements and fixes:
    • Removed dependency on Microsoft .Net 3.5.
    • Users will no longer see a prompt to provide their credentials if their Mac computers couldn't connect to SCCM for a long period of time.
    • Fixed an issue when task sequence step "Format and partition disk" was failing on APFS volumes.
    • Fixed an issue when applying macOS image captured from HFS volumes was failing on APFS volumes.
    • Fixed an issue when Parallels Mac client could change the system software updates catalog URL, even if it was configured by a third-party software.
    • Fixed an issue when it was not possible to connect via SSH to a Mac computer that was booted from the network using a boot image captured from macOS 10.13 with enabled SSH access.
    • Fixed an issue when MDM enrollment profiles with attached configuration profiles containing certificates could not be assigned to Mac computers.
    • Fixed an issue when some Java update applications were not recognized as installed causing the dependent task sequence steps failure.

    Parallels Mac Management Prerequisites Checker v6.1 build PMM-Prerequisites-Checker-6.1.0.22 (December 21, 2017)

    This is an initial release of Parallels Mac Management Prerequisites Checker v6.1 (build PMM-Prerequisites-Checker-6.1.0.22). The Prerequisites Checker allows to check readiness of an SCCM infrastructure for Parallels Mac Management v6.x deployment.

    Parallels Mac Management v6.1 for Microsoft SCCM (build PMA2012-6.1.0.22) released October 10, 2017 includes the following new features:

    • Support for macOS 10.13 High Sierra.
    • The Problem Report dialog now displays the hostname of the Mac computer from which the report has originating.
    Parallels Mac Management v6.1 for Microsoft SCCM (build PMA2012-6.1.0.22) includes improvements and fixes to the following issues:
    • Configuration settings for Parallels Desktop 12.1.2 (41525) and its virtual machines would not apply via Configuration Baselines.
    • A dialog with a prompt to restart the Mac was not shown after an interactive software installation in some cases.
    • The Published Date value was incorrectly formatted in Parallels Application Portal if Canada or UK was set in System Preferences > Language and Region.
    • Publishing of software updates was failing with error "The actual length is greater than the MaxLength value" in some cases.
    • Applying a baseline with the FileVault 2 configuration item was failing for domain users.
    • Parallels Mac Client would fail to connect to Parallels Proxy in some cases.
    • A link to the Parallels Mac Client installation package was not updated during Parallels MDM server reconfiguration.
    • The deployment status for an installed software distribution packages in SCCM 1606 was reported as "Unknown".

    Parallels Mac Management v6.0 Hotfix 1 for Microsoft SCCM (build PMA2012-6.0.1.2) released
    August 31, 2017 includes fixes to the following issues:

    • Parallels Task Sequence Wizard may fail to authenticate if LDAP signing is enabled.
    • Format and Partition Disk TS step fails if the target volume has CoreStorage partition

    Parallels Mac Management v6.0 for Microsoft SCCM build PMA2012-6.0.0.87 (July 24, 2017) includes the following new features:

    • Ability to Wipe and Lock a Mac remotely.
    • Support for Software Metering.
    • Custom Settings payload added to the built-in Configuration Profile Configuration Item editor.
    • Support for Maintenance Windows for software and Apple software update deployments.
    • Support for Assignment Schedules for software deployments.
    • New and updated Task Sequence steps:
      • Install Application step added.
      • Format and Partition Disk step added.
      • Apply OS X Image step now includes an option to configure the destination partition.
      • Join Domain step now includes an option to configure a confirmation before creating a mobile account.
    • Task Sequence editor supports copy and paste of steps between task sequences.
    • Parallels Mac Client can be automatically migrated to a new SCCM installation during the migration from the old SCCM infrastructure to the new one.
    Parallels Mac Management v6.0 for Microsoft SCCM build PMA2012-6.0.0.87 includes improvements and fixes to the following issues:

    • Parallels Mac Client running on OS X 10.11.5 crashes when processing the Mac App Store Update for OS X El Capitan (091-10728).
    • Configuration Profile editor wouldn't save values of some combo-boxes.
    • Parallels Mac Client crashes when syncing with Parallels Application Portal in some cases.
    • Compliance status of a Configuration Baseline could be reported as "Compliant" when some of its items apply with failures in some cases.
    • NetBoot worked incorrectly on new Macbook Pro (13", 2016).
    • Confusing "Quota violation" records were listed in pma_isv_proxy_service.log.
    • It was impossible to register Parallels Mac Client manually using credentials from a different trusted forest.
    • It was impossible to authenticate in the Task Sequence Wizard using credentials from a different trusted forest.
    • Task Sequence Wizard was unresponsive in some cases.
    • Parallels Mac Client auto-upgrade package would not be created if DP was configured with a self-signed certificate (PKI mode).
    • Verification of the correct user name and password in the "Capture OS X Image" step was failing if the connection to the file share was already opened.
    • Parallels MDM server was crashing if the Device Enrollment Profile contained a signed or encrypted MDM profile.
    • List of items in the Configuration Manager console was not refreshed automatically after creating Configuration Profiles, OS X images, and Task Sequences for Macs.
    • Icons in message boxes on high dpi resolutions were rendered incorrectly.
    • If "Program Name" of a package in the Install Software Task Sequence step contained the apostrophe symbol, then the package could not be install.
    • Parallels Mac client was sending reports about Windows updates.
    • Device Enrollment Profiles would still install on DEP devices even if a profile was already unassigned.
    • Software package installation would not initiate if it was installed once, even if after the software was removed.
    • It was impossible to configure Parallels Proxy if the user account for the configuration procedure and for running the service was the same (privileged user).


    Parallels Mac Management v5.0 Update 1 Hotfix 2 for Microsoft SCCM (build PMA2012-5.0.4.1) includes the fix for the following issue:

    • Parallels Mac Client running on OS X 10.11.5 keeps crashing when processing the Mac App Store Update for OS X El Capitan (091-10728)

    Parallels Mac Management v5.0 Prerelease 1 for Microsoft SCCM (build PMA2012-5.0.0.78) includes fixes to the following new features:
    • Enroll and manage Macs via Apple DEP
    • Mac Admin tool: Parallels Mac Client push installation
    • Mac Admin tool: Collect inventory on request
    • Mac Admin tool: Execute script

    Parallels Mac Management v4.5 Hotfix 2 for Microsoft SCCM (build PMA2012-4.5.4.5) includes fixes to the following issues:
    • Macs with Fusion Drive could not be encrypted with FileVault2 Configuration Item.
    • State messages sent from Parallels Mac Clients could overload Parallels Proxy in some cases.
    • The Task Sequence Wizard was using subnet broadcasts instead of global broadcasts when obtaining information about the available OS X system images.
    • Compliance Settings could not be retrieved in some cases.
    • iMacs model 17.1 could not be booted over the network.

    Parallels Mac Management v4.5 Hotfix 1 for Microsoft SCCM build PMA2012-4.5.1.11 (April 7, 2016) includes the following fixes:

    • Fixes
      • Resource names were changed from computer names to DNS names of Macs.
      • OS X Software Update Management component couldn't be installed on Windows 2008.
      • PMM Proxy could not be configured in the infrastructure containing several Primary Sites joined to CAS.
      • Mac Client crashed when processing Application policies with some specific detection methods.
      • NetBoot and NetRestore images were repeatedly uninstalled if NetBoot couldn't access WMI objects due to time out.

      Mac Client could try accessing Internet-facing MP locations from the intranet
    Parallels Mac Management v4.5 GA for Microsoft SCCM (build PMA2012-4.5.0.106) includes the following new features and improvements:
    • OS X Software Update Management (also referred to as OS X Patch Management).
    • Active Directory System Discovery support, including:
      • Push installation of Parallels Mac Client to resources found by Active Directory System Discovery.
      • Updating the domain-specific information of domain-joined Macs by Active Directory System Discovery.
      Note: Prior to this release, user account settings for Parallels Network Discovery had to be configured using the Accounts tab page on the Parallels Network Discovery Properties dialog. These settings have been moved to the new Parallels Mac Client Push Installation Properties dialog, which is now used for both discovery methods. For more information, please see the Configuring Parallels Mac Client Push Installation Properties section in the Parallels Mac Management for Microsoft SCCM Administrator's Guide.
    • Creating OS X Operating System Images using the Capture OS X Image task sequence step.
      Note: OS X Boot Images created in previous versions of Parallels Mac Management must be re-created after upgrading to Parallels Mac Management v4.5.
    • Automatic upgrade of Parallels Mac Client on Macs.
      Note: The automatic upgrade functionality will only work if a Mac computer has Parallels Mac Client v4.5 or newer installed.
    • Reporting the Mac logon information as part of hardware inventory.
    • Application deployment status reporting.
    • Improved usability of the Task Sequence Wizard.
    The following issues have been fixed:
    • Greatly improved usability of the Parallels Application Portal, including fixes to the following issues:
      • Applications would not install if you try to install too many of them at once.
      • Incorrect application status displayed if the application data in SCCM changes.
      • Application detection failure occurs after you recreate the deployment.
      • Installation deadline for required applications ignored.
    • OS X Image Deployment and Task Sequence issues that were fixed:
      • An OS X boot image may have issues if created on a Mac where the recovery partition version doesn't match the OS X version on the active boot partition.
      • A Mac booted from the network freezes in some cases.
    • Fixes to issues that occurred when SCCM was configured using custom settings:
      • Parallels Mac Client could not download policies in PKI when client signing was required.
      • Software packages could not be downloaded from Distribution Points when custom ports were specified in Site Configuration > Site Properties in the Configuration Manager console.
      • Parallels Proxy could not be configured if SCCM was connected to Microsoft SQL Server using non-default ports.
    • Other fixes:
      • Parallels Mac Client tried to connect to internet-facing MPs in some cases.
      • Parallels Mac Client registration occasionally crashed on Macs on which the LocalHostName identifier was not set.
      • The Parallels NetBoot service didn't work with WDS on 32-bit Windows systems.
    Parallels Mac Management v4.0 Hotfix 1 for Microsoft SCCM (build PMA2012-4.0.1.31) adds the following new features:
    • Support for OS X 10.11 El Capitan.
    • Support for never-booted OS X images in Task Sequences for Macs.
    • Optimized AppleCare Warranty status reporting.
    The following issues have been fixed:
    • Parallels Proxy is unable to process problem reports from Macs in rare cases.
    • Desired configuration scripts report a failure if OS X 10.10 is selected as "Supported Platform".
    • An application doesn't show up in Parallels Application Portal if the "Operating system" requirement is set to "Mac OS X 10.10".
    • A Mac is named incorrectly when joining AD Domain if the Mac's host name is not set.
    • Parallels Mac client occasionally re-registers itself when requesting policies after the protocol for Parallels Proxy communication is changed from HTTP to HTTPS.
    • An incomplete Parallels Mac client version info is displayed in the Parallels Mac Management app in System Preferences.
    • Parallels Proxy crashes in Secondary Sites when switching MPs and DPs from HTTPS to HTTP.
    • Wrong task sequences are shown in the Task Sequence Wizard when a Mac is booted via an external Ethernet adapter that is shared between other enrolled Macs.
    • Wrong device and/or collection variables are used during task sequence execution if a Mac is booted via an external Ethernet adapter that is shared between other enrolled Macs.
    • FileVault 2 information is not reported to SCCM if a Mac has no Recovery Partition.
    • A Computer ID is set incorrectly when adding a Mac to AD domain via Task Sequence.
    • A Task Sequence list contains duplicate records after repeated deployment.
    Parallels Mac Management v4.0 GA for Microsoft SCCM (build PMA2012-4.0.0.55) adds new features to the Operating System Deployment / Task Sequence functionality:
    • Creating OS X Boot Image and OS X Operating System Image for NetBoot.
      Note: OS X Images and Task Sequences for Macs created in previous versions of Parallels Mac Management must be re-created after upgrading to Parallels Mac Management v4.0.
    • Support for Task Sequences for Macs, including the following task sequence steps:
      • Install and enroll Parallels Mac Client
      • Install Software
      • Join Domain
      • Set Host name
      • Set Variables
    • Improvements to the Parallels Proxy per-requisites diagnostic
    The following issues have been fixed:
    • Parallels Proxy configuration failed in some cases, even if prerequisites checking was successful.
    • Prerequisites checking may fail if Parallels Proxy was installed on a host with no SMS Provider installed.
    • Configuring Parallels Desktop Business Edition and Parallels virtual machine preferences via Compliance Settings didn't work in some cases.
    • Unattended installation and configuration of Parallels Proxy in Secondary Sites failed in some cases.
    • Parallels Proxy couldn't publish service information to Active Directory in some cases.
    • Parallels Proxy installed on a Secondary Site was using security settings of the Parallels Proxy installed on the parent Primary Site.
     
    Last edited by a moderator: Mar 22, 2021
Thread Status:
Not open for further replies.

Share This Page