Good day,
Doing google searches all I can find is LinuxCNC not working in parallels even though it runs fine in VirtualBox on VMware. it uses a realtime kernel. The OS and GUI interface starup just fine. But LinuxCNC just dies with an error after the splash screen. I don't really need it to control the machine. I just want the CAD part to work to do the design and then a low end laptop running linux native will drive the machine. Does anyone have a system like this working? My error log is below. Thank you
Print file information:
RUN_IN_PLACE=no
LINUXCNC_DIR=
LINUXCNC_BIN_DIR=/usr/bin
LINUXCNC_TCL_DIR=/usr/lib/tcltk/linuxcnc
LINUXCNC_SCRIPT_DIR=
LINUXCNC_RTLIB_DIR=/usr/realtime-3.4-9-rtai-686-pae/modules/linuxcnc
LINUXCNC_CONFIG_DIR=
LINUXCNC_LANG_DIR=/usr/share/linuxcnc/tcl/msgs
INIVAR=inivar
HALCMD=halcmd
LINUXCNC_EMCSH=/usr/bin/wish8.5
LINUXCNC - 2.7.9
Machine configuration directory is '/home/pmowry/linuxcnc/configs/sim.axis'
Machine configuration file is 'axis.ini'
INIFILE=/home/pmowry/linuxcnc/configs/sim.axis/axis.ini
PARAMETER_FILE=sim.var
TASK=milltask
HALUI=halui
DISPLAY=axis
Starting LinuxCNC...
Starting LinuxCNC server program: linuxcncsvr
Loading Real Time OS, RTAPI, and HAL_LIB modules
Starting LinuxCNC IO program: io
Starting HAL User Interface program: halui
Found file(lib): /usr/share/linuxcnc/hallib/core_sim.hal
Found file(lib): /usr/share/linuxcnc/hallib/sim_spindle_encoder.hal
Found file(lib): /usr/share/linuxcnc/hallib/axis_manualtoolchange.hal
Found file(lib): /usr/share/linuxcnc/hallib/simulated_home.hal
Found file(REL): ./check_constraints.hal
Starting TASK program: milltask
Starting DISPLAY program: axis
RTAPI: ERROR: Unexpected realtime delay on task 1
This Message will only display once per session.
Run the Latency Test and resolve before continuing.
task: main loop took 0.015201 seconds
Shutting down and cleaning up LinuxCNC...
Killing task linuxcncsvr, PID=4005
Killing task milltask, PID=4130
task: 235 cycles, min=0.000005, max=0.015201, avg=0.002172, 1 latency excursions (> 10x expected cycle time of 0.001000s)
Removing HAL_LIB, RTAPI, and Real Time OS modules
Removing NML shared memory segments
Debug file information:
pickconfig: installed aux examples: /usr/share/linuxcnc/aux_examples/NativeCAM
.
X Error of failed request: BadWindow (invalid Window parameter)
Major opcode of failed request: 3 (X_GetWindowAttributes)
Resource id in failed request: 0xffffffff
Serial number of failed request: 723
Current serial number in output stream: 724
4005
PID TTY STAT TIME COMMAND
4130
PID TTY STAT TIME COMMAND
Stopping realtime threads
Unloading hal components
Kernel message information:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.4-9-rtai-686-pae (Debian 3.4.55-4linuxcnc) () (gcc version 4.6.3 (Debian 4.6.3-14) ) #1 SMP PREEMPT Debian 3.4.55-4linuxcnc
[ 0.000000] Disabled fast string operations
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000002ffec000 (usable)
[ 0.000000] BIOS-e820: 000000002ffec000 - 000000002ffee000 (reserved)
[ 0.000000] BIOS-e820: 000000002ffee000 - 000000002fffb000 (ACPI data)
[ 0.000000] BIOS-e820: 000000002fffb000 - 0000000030000000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000fd000000 - 00000000fd800000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffc00000 - 0000000100000000 (reserved)
[ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: Parallels Software International Inc. Parallels Virtual Platform/Parallels Virtual Platform, BIOS 12.2.1 (41615) 06/26/2017
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] last_pfn = 0x2ffec max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-C7FFF write-protect
[ 0.000000] C8000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask FE0000000 write-back
[ 0.000000] 1 base 020000000 mask FF0000000 write-back
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] found SMP MP-table at [c009fc30] 9fc30
[ 0.000000] initial memory mapped : 0 - 01800000
[ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[ 0.000000] init_memory_mapping: 0000000000000000-000000002ffec000
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 002fc00000 page 2M
[ 0.000000] 002fc00000 - 002ffec000 page 4k
[ 0.000000] kernel direct mapping tables up to 0x2ffebfff @ [mem 0x017f8000-0x017fffff]
[ 0.000000] RAMDISK: 2ea21000 - 2f78b000
[ 0.000000] ACPI: RSDP 000e0000 00024 (v02 PRLS )
[ 0.000000] ACPI: XSDT 2fff2940 0004C (v01 PRLS PRLS_OEM 00000001 INTL 20051216)
[ 0.000000] ACPI: FACP 2ffee0c0 000F4 (v03 PRLS PRLS_OEM 00000001 INTL 20051216)
[ 0.000000] ACPI: DSDT 2ffee440 0447A (v02 PRLS PRLSACPI 00001001 INTL 20051216)
[ 0.000000] ACPI: FACS 2ffee1c0 00040
[ 0.000000] ACPI: APIC 2ffee200 00216 (v01 PRLS PRLS_OEM 00000001 INTL 20051216)
[ 0.000000] ACPI: HPET 2fff28c0 00038 (v00 PRLS PRLS_OEM 00000001 INTL 20051216)
[ 0.000000] ACPI: MCFG 2fff2900 0003C (v01 PRLS PRLS_OEM 00000001 INTL 20051216)
[ 0.000000] ACPI: OEM1 2fff29c0 00394 (v01 PRLS PRLS_OEM 00000001 INTL 20051216)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 767MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 2ffec000
[ 0.000000] low ram: 0 - 2ffec000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x0002ffec
[ 0.000000] HighMem empty
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] Early memory PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0002ffec
[ 0.000000] On node 0 totalpages: 196475
[ 0.000000] free_area_init_node: node 0, pgdat c1498a00, node_mem_map ef9eb200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 1504 pages used for memmap
[ 0.000000] Normal zone: 190988 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x4008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x08] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x09] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x0a] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x0b] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x0c] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x0d] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x0e] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x0f] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x10] lapic_id[0x10] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x11] lapic_id[0x11] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x12] lapic_id[0x12] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x13] lapic_id[0x13] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x14] lapic_id[0x14] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x15] lapic_id[0x15] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x16] lapic_id[0x16] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x17] lapic_id[0x17] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x18] lapic_id[0x18] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x19] lapic_id[0x19] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x1a] lapic_id[0x1a] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x1b] lapic_id[0x1b] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x1c] lapic_id[0x1c] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x1d] lapic_id[0x1d] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x1e] lapic_id[0x1e] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x1f] lapic_id[0x1f] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x09] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x0a] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x0b] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x0c] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x0d] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x0e] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x0f] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x10] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x11] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x12] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x13] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x14] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x15] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x16] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x17] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x18] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x19] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x1a] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x1b] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x1c] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x1d] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x1e] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x1f] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 0, version 2, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 dfl edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 dfl edge)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] ACPI: IRQ14 used by override.
[ 0.000000] ACPI: IRQ15 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] 32 Processors exceeds NR_CPUS limit of 8
[ 0.000000] SMP: Allowing 8 CPUs, 6 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000
[ 0.000000] PM: Registered nosave memory: 00000000000dc000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 30000000 (gap: 30000000:cd000000)
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 17 pages/cpu @ef95d000 s48384 r0 d21248 u69632
[ 0.000000] pcpu-alloc: s48384 r0 d21248 u69632 alloc=17*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 194939
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.4-9-rtai-686-pae root=UUID=14087b67-b9dd-40bb-bb82-33cb62c62077 ro initrd=/install/gtk/initrd.gz lapic quiet rootdelay=5
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
[ 0.000000] allocated 1572576 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (00000000:00000000)
[ 0.000000] Memory: 757252k/786352k available (3495k kernel code, 28648k reserved, 1237k data, 416k init, 0k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff17000 - 0xfffff000 ( 928 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xf07ec000 - 0xff7fe000 ( 240 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xeffec000 ( 767 MB)
[ 0.000000] .init : 0xc14a0000 - 0xc1508000 ( 416 kB)
[ 0.000000] .data : 0xc1369d4a - 0xc149f480 (1237 kB)
[ 0.000000] .text : 0xc1000000 - 0xc1369d4a (3495 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:2304 nr_irqs:744 16
[ 0.000000] CPU 0 irqstacks, hard=ee406000 soft=ee408000
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Interrupt pipeline (release #3)
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.004000] Detected 2600.011 MHz processor.
[ 0.000023] Calibrating delay loop (skipped), value calculated using timer frequency.. 5200.02 BogoMIPS (lpj=10400044)
[ 0.000041] pid_max: default: 32768 minimum: 301
[ 0.000091] Security Framework initialized
[ 0.000121] AppArmor: AppArmor disabled by boot time parameter
[ 0.000169] Mount-cache hash table entries: 512
[ 0.000219] Initializing cgroup subsys cpuacct
[ 0.000231] Initializing cgroup subsys memory
[ 0.000249] Initializing cgroup subsys devices
[ 0.000258] Initializing cgroup subsys freezer
[ 0.000267] Initializing cgroup subsys net_cls
[ 0.000276] Initializing cgroup subsys blkio
[ 0.000294] Initializing cgroup subsys perf_event
[ 0.000344] Disabled fast string operations
[ 0.000353] CPU: Physical Processor ID: 0
[ 0.000359] CPU: Processor Core ID: 0
[ 0.001534] mce: CPU supports 0 MCE banks
[ 0.001605] ACPI: Core revision 20120320
[ 0.002300] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.002540] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.042392] CPU0: Intel(R) Core(TM) i5-4288U CPU @ 2.60GHz stepping 01
[ 0.149213] Performance Events: unsupported p6 CPU model 69 no PMU driver, software events only.
[ 0.161179] NMI watchdog: disabled (cpu0): hardware events not enabled
[ 0.173177] CPU 1 irqstacks, hard=ee498000 soft=ee49a000
[ 0.173189] Booting Node 0, Processors #1
[ 0.183402] Initializing CPU#1
[ 0.184776] Disabled fast string operations
[ 0.189929] mce: CPU supports 0 MCE banks
[ 0.192139] NMI watchdog: disabled (cpu1): hardware events not enabled
[ 0.192373] Brought up 2 CPUs
[ 0.192385] Total of 2 processors activated (10400.04 BogoMIPS).
[ 0.194335] devtmpfs: initialized
[ 0.194663] PM: Registering ACPI NVS region [mem 0x2fffb000-0x2fffffff] (20480 bytes)
[ 0.194744] dummy:
[ 0.194806] NET: Registered protocol family 16
[ 0.194856] ACPI: bus type pci registered
[ 0.194906] PCI: MMCONFIG for domain 0000 [bus 00-0f] at [mem 0xfc000000-0xfcffffff] (base 0xfc000000)
[ 0.194912] PCI: not using MMCONFIG
[ 0.194962] PCI: PCI BIOS revision 2.10 entry at 0xf4182, last bus=2
[ 0.194968] PCI: Using configuration type 1 for base access
[ 0.196391] bio: create slab <bio-0> at 0
[ 0.196824] ACPI: Added _OSI(Module Device)
[ 0.196836] ACPI: Added _OSI(Processor Device)
[ 0.196842] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.196851] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.197123] ACPI: EC: Look up EC in DSDT
[ 0.197673] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.197873] \_SB_:_OSC invalid UUID
[ 0.197885] _OSC request data:1 14
[ 0.198435] ACPI: Interpreter enabled
[ 0.198485] ACPI: (supports S0 S3 S4 S5)
[ 0.198535] ACPI: Using IOAPIC for interrupt routing
[ 0.198571] PCI: MMCONFIG for domain 0000 [bus 00-0f] at [mem 0xfc000000-0xfcffffff] (base 0xfc000000)
[ 0.198621] PCI: MMCONFIG at [mem 0xfc000000-0xfcffffff] reserved in ACPI motherboard resources
[ 0.198630] PCI: Using MMCONFIG for extended config space
[ 0.201836] ACPI: EC: GPE = 0xa, I/O: command/status = 0x66, data = 0x62
[ 0.201886] ACPI: No dock devices found.
[ 0.201913] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.201958] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-7f])
[ 0.202008] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.202014] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.202023] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.202029] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff]
[ 0.202035] pci_root PNP0A08:00: host bridge window [mem 0x000c0000-0x000cffff]
[ 0.202040] pci_root PNP0A08:00: host bridge window [mem 0xb0000000-0xfbffffff]
[ 0.202046] pci_root PNP0A08:00: host bridge window [mem 0xfd000000-0xfd7fffff]
[ 0.202064] pci_root PNP0A08:00: ignoring host bridge window [mem 0x000d0000-0x000dffff] (conflicts with reserved [mem 0x000dc000-0x000fffff])
[ 0.202114] PCI host bridge to bus 0000:00
[ 0.202120] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.202126] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.202132] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.202138] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000cffff]
[ 0.202147] pci_bus 0000:00: root bus resource [mem 0xb0000000-0xfbffffff]
[ 0.202153] pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfd7fffff]
[ 0.202201] pci 0000:00:00.0: [8086:29a0] type 00 class 0x060000
[ 0.205102] pci 0000:00:01.0: [8086:2981] type 01 class 0x060401
[ 0.205152] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.205202] pci 0000:00:03.0: [1ab8:4000] type 00 class 0xff0000
[ 0.205252] pci 0000:00:03.0: reg 10: [io 0x8000-0x801f]
[ 0.205301] pci 0000:00:05.0: [1af4:1000] type 00 class 0x020000
[ 0.205351] pci 0000:00:05.0: reg 10: [io 0x8200-0x823f]
[ 0.205401] pci 0000:00:05.0: reg 14: [mem 0xee000000-0xee000fff]
[ 0.205451] pci 0000:00:0a.0: [1011:0022] type 01 class 0x060400
[ 0.205501] pci 0000:00:0e.0: [1af4:1002] type 00 class 0x050000
[ 0.205551] pci 0000:00:0e.0: reg 10: [io 0xb000-0xb01f]
[ 0.205601] pci 0000:00:1d.0: [8086:2658] type 00 class 0x0c0300
[ 0.205651] pci 0000:00:1d.0: reg 20: [io 0xb200-0xb21f]
[ 0.205701] pci 0000:00:1d.6: [1033:0194] type 00 class 0x0c0330
[ 0.205751] pci 0000:00:1d.6: reg 10: [mem 0xef100000-0xef100fff]
[ 0.205800] pci 0000:00:1d.7: [8086:265c] type 00 class 0x0c0320
[ 0.205850] pci 0000:00:1d.7: reg 10: [mem 0xef140000-0xef1403ff]
[ 0.205900] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060400
[ 0.205950] pci 0000:00:1f.0: [8086:2810] type 00 class 0x060100
[ 0.206000] pci 0000:00:1f.0: quirk: [io 0x4000-0x407f] claimed by ICH6 ACPI/GPIO/TCO
[ 0.206039] pci 0000:00:1f.1: [8086:244b] type 00 class 0x010180
[ 0.206089] pci 0000:00:1f.1: reg 20: [io 0xe000-0xe00f]
[ 0.206139] pci 0000:00:1f.2: [8086:2821] type 00 class 0x010601
[ 0.206189] pci 0000:00:1f.2: reg 10: [io 0xe200-0xe207]
[ 0.206238] pci 0000:00:1f.2: reg 14: [io 0xe400-0xe403]
[ 0.206288] pci 0000:00:1f.2: reg 18: [io 0xe600-0xe607]
[ 0.206338] pci 0000:00:1f.2: reg 1c: [io 0xe800-0xe803]
[ 0.206388] pci 0000:00:1f.2: reg 20: [io 0xea00-0xea0f]
[ 0.206438] pci 0000:00:1f.2: reg 24: [mem 0xf0200000-0xf0201fff]
[ 0.206488] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.206538] pci 0000:00:1f.3: [8086:283e] type 00 class 0x0c0500
[ 0.206588] pci 0000:00:1f.3: reg 10: [mem 0xf0240000-0xf0240fff]
[ 0.206638] pci 0000:00:1f.3: reg 20: [io 0xec00-0xec1f]
[ 0.206687] pci 0000:00:1f.4: [8086:2445] type 00 class 0x040100
[ 0.206737] pci 0000:00:1f.4: reg 10: [io 0xee00-0xeeff]
[ 0.206787] pci 0000:00:1f.4: reg 14: [io 0xf000-0xf0ff]
[ 0.206837] pci 0000:01:00.0: [1ab8:4005] type 00 class 0x030000
[ 0.206887] pci 0000:01:00.0: reg 10: [io 0x6000-0x601f]
[ 0.206937] pci 0000:01:00.0: reg 14: [mem 0xb0000000-0xb7ffffff pref]
[ 0.206987] pci 0000:01:00.0: reg 30: [mem 0xe2000000-0xe200ffff pref]
[ 0.207037] pci 0000:00:01.0: PCI bridge to [bus 01-01] (subtractive decode)
[ 0.207045] pci 0000:00:01.0: bridge window [io 0x6000-0x7fff]
[ 0.207050] pci 0000:00:01.0: bridge window [mem 0xe2000000-0xedffffff]
[ 0.207058] pci 0000:00:01.0: bridge window [mem 0xb0000000-0xdfffffff 64bit pref]
[ 0.207061] pci 0000:00:01.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.207064] pci 0000:00:01.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.207066] pci 0000:00:01.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.207069] pci 0000:00:01.0: bridge window [mem 0x000c0000-0x000cffff] (subtractive decode)
[ 0.207071] pci 0000:00:01.0: bridge window [mem 0xb0000000-0xfbffffff] (subtractive decode)
[ 0.207074] pci 0000:00:01.0: bridge window [mem 0xfd000000-0xfd7fffff] (subtractive decode)
[ 0.207124] pci 0000:00:0a.0: PCI bridge to [bus 02-02]
[ 0.207129] pci 0000:00:0a.0: bridge window [io 0x9000-0xafff]
[ 0.207134] pci 0000:00:0a.0: bridge window [mem 0xee100000-0xef0fffff]
[ 0.207139] pci 0000:00:0a.0: bridge window [mem 0xe0000000-0xe0ffffff pref]
[ 0.207188] pci 0000:00:1e.0: PCI bridge to [bus 03-03] (subtractive decode)
[ 0.207193] pci 0000:00:1e.0: bridge window [io 0xc000-0xdfff]
[ 0.207197] pci 0000:00:1e.0: bridge window [mem 0xef200000-0xf01fffff]
[ 0.207204] pci 0000:00:1e.0: bridge window [mem 0xe1000000-0xe1ffffff 64bit pref]
[ 0.207206] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.207208] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.207210] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.207213] pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000cffff] (subtractive decode)
[ 0.207215] pci 0000:00:1e.0: bridge window [mem 0xb0000000-0xfbffffff] (subtractive decode)
[ 0.207217] pci 0000:00:1e.0: bridge window [mem 0xfd000000-0xfd7fffff] (subtractive decode)
[ 0.207267] pci_bus 0000:00: on NUMA node 0
[ 0.207274] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.207324] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PX16._PRT]
[ 0.207374] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIN._PRT]
[ 0.207424] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI2._PRT]
[ 0.207474] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x0f)
[ 0.213091] ACPI Exception: AE_NOT_FOUND, Evaluating _PRS (20120320/pci_link-184)
[ 0.213420] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.213450] vgaarb: loaded
[ 0.213470] vgaarb: bridge control possible 0000:01:00.0
[ 0.213520] PCI: Using ACPI for IRQ routing
[ 0.213550] PCI: pci_cache_line_size set to 64 bytes
[ 0.213600] reserve RAM buffer: 000000000009fc00 - 000000000009ffff
[ 0.213620] reserve RAM buffer: 000000002ffec000 - 000000002fffffff
[ 0.213719] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.213769] hpet0: 8 comparators, 64-bit 16.000000 MHz counter
[ 0.215895] Switching to clocksource hpet
[ 0.216181] pnp: PnP ACPI init
[ 0.216231] ACPI: bus type pnp registered
[ 0.216281] pnp 00:00: [bus 00-7f]
[ 0.216301] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.216331] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.216351] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.216371] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.216391] pnp 00:00: [mem 0x000d0000-0x000dffff window]
[ 0.216421] pnp 00:00: [mem 0x000c0000-0x000cffff window]
[ 0.216460] pnp 00:00: [mem 0xb0000000-0xfbffffff window]
[ 0.216490] pnp 00:00: [mem 0xfd000000-0xfd7fffff]
[ 0.216540] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.217338] pnp 00:01: [io 0x0060]
[ 0.217358] pnp 00:01: [io 0x0064]
[ 0.217407] pnp 00:01: [irq 1]
[ 0.217457] pnp 00:01: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.217507] pnp 00:02: [irq 12]
[ 0.217557] pnp 00:02: Plug and Play ACPI device, IDs PNP0f03 (active)
[ 0.217607] pnp 00:03: [io 0x0070-0x0075]
[ 0.217657] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.217707] pnp 00:04: [io 0x0061]
[ 0.217757] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.217807] pnp 00:05: [mem 0xff000000-0xffffffff]
[ 0.217856] system 00:05: [mem 0xff000000-0xffffffff] could not be reserved
[ 0.217886] system 00:05: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.217936] pnp 00:06: [io 0x0000-0x000f]
[ 0.217956] pnp 00:06: [io 0x0080-0x0090]
[ 0.218006] pnp 00:06: [io 0x0094-0x009f]
[ 0.218026] pnp 00:06: [io 0x00c0-0x00df]
[ 0.218046] pnp 00:06: [dma 4]
[ 0.218096] pnp 00:06: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.218146] pnp 00:07: [io 0x0092-0x0093]
[ 0.218166] pnp 00:07: [io 0x04d0-0x04d1]
[ 0.218186] pnp 00:07: [mem 0xfc000000-0xfcffffff]
[ 0.218236] system 00:07: [io 0x04d0-0x04d1] has been reserved
[ 0.218256] system 00:07: [mem 0xfc000000-0xfcffffff] has been reserved
[ 0.218286] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.218335] pnp 00:08: [io 0x00f0-0x00ff]
[ 0.218385] pnp 00:08: [irq 13]
[ 0.218435] pnp 00:08: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.218485] pnp 00:09: [mem 0xff000000-0xffffffff]
[ 0.218535] pnp 00:09: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.218585] pnp 00:0a: [mem 0xfed00000-0xfed003ff]
[ 0.218605] pnp 00:0a: [irq 0 disabled]
[ 0.218655] pnp 00:0a: [irq 8]
[ 0.218705] pnp 00:0a: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.228087] pnp: PnP ACPI: found 11 devices
[ 0.228117] ACPI: ACPI bus type pnp unregistered
[ 0.228167] PnPBIOS: Disabled by ACPI PNP
[ 0.295928] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.295933] pci 0000:00:01.0: bridge window [io 0x6000-0x7fff]
[ 0.295983] pci 0000:00:01.0: bridge window [mem 0xe2000000-0xedffffff]
[ 0.299878] pci 0000:00:01.0: bridge window [mem 0xb0000000-0xdfffffff 64bit pref]
[ 0.299928] pci 0000:00:0a.0: PCI bridge to [bus 02-02]
[ 0.299978] pci 0000:00:0a.0: bridge window [io 0x9000-0xafff]
[ 0.303911] pci 0000:00:0a.0: bridge window [mem 0xee100000-0xef0fffff]
[ 0.303961] pci 0000:00:0a.0: bridge window [mem 0xe0000000-0xe0ffffff pref]
[ 0.307387] pci 0000:00:1e.0: PCI bridge to [bus 03-03]
[ 0.307437] pci 0000:00:1e.0: bridge window [io 0xc000-0xdfff]
[ 0.309607] pci 0000:00:1e.0: bridge window [mem 0xef200000-0xf01fffff]
[ 0.309657] pci 0000:00:1e.0: bridge window [mem 0xe1000000-0xe1ffffff 64bit pref]
[ 0.311873] pci 0000:00:0a.0: setting latency timer to 64
[ 0.315349] pci 0000:00:1e.0: setting latency timer to 64
[ 0.315841] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.315844] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.315846] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.315850] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000cffff]
[ 0.315853] pci_bus 0000:00: resource 8 [mem 0xb0000000-0xfbffffff]
[ 0.315855] pci_bus 0000:00: resource 9 [mem 0xfd000000-0xfd7fffff]
[ 0.315858] pci_bus 0000:01: resource 0 [io 0x6000-0x7fff]
[ 0.315860] pci_bus 0000:01: resource 1 [mem 0xe2000000-0xedffffff]
[ 0.315862] pci_bus 0000:01: resource 2 [mem 0xb0000000-0xdfffffff 64bit pref]
[ 0.315865] pci_bus 0000:01: resource 4 [io 0x0000-0x0cf7]
[ 0.315867] pci_bus 0000:01: resource 5 [io 0x0d00-0xffff]
[ 0.315870] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.315872] pci_bus 0000:01: resource 7 [mem 0x000c0000-0x000cffff]
[ 0.315874] pci_bus 0000:01: resource 8 [mem 0xb0000000-0xfbffffff]
[ 0.315904] pci_bus 0000:01: resource 9 [mem 0xfd000000-0xfd7fffff]
[ 0.315924] pci_bus 0000:02: resource 0 [io 0x9000-0xafff]
[ 0.315954] pci_bus 0000:02: resource 1 [mem 0xee100000-0xef0fffff]
[ 0.315974] pci_bus 0000:02: resource 2 [mem 0xe0000000-0xe0ffffff pref]
[ 0.316004] pci_bus 0000:03: resource 0 [io 0xc000-0xdfff]
[ 0.316024] pci_bus 0000:03: resource 1 [mem 0xef200000-0xf01fffff]
[ 0.316054] pci_bus 0000:03: resource 2 [mem 0xe1000000-0xe1ffffff 64bit pref]
[ 0.316074] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7]
[ 0.316094] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff]
[ 0.316124] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.316144] pci_bus 0000:03: resource 7 [mem 0x000c0000-0x000cffff]
[ 0.316164] pci_bus 0000:03: resource 8 [mem 0xb0000000-0xfbffffff]
[ 0.316194] pci_bus 0000:03: resource 9 [mem 0xfd000000-0xfd7fffff]
[ 0.323891] NET: Registered protocol family 2
[ 0.323953] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.324075] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.324125] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.324175] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.324214] TCP: reno registered
[ 0.324244] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.324294] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.324330] NET: Registered protocol family 1
[ 0.451593] pci 0000:01:00.0: Boot video device
[ 0.451643] PCI: CLS 0 bytes, default 64
[ 0.451693] Unpacking initramfs...
[ 1.297755] Freeing initrd memory: 13736k freed
[ 1.298582] audit: initializing netlink socket (disabled)
[ 1.298631] type=2000 audit(1499894231.200:1): initialized
[ 1.314699] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 1.315956] VFS: Disk quotas dquot_6.5.2
[ 1.316010] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.316070] msgmni has been set to 1505
[ 1.317084] alg: No test for stdrng (krng)
[ 1.317158] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 1.317172] io scheduler noop registered
[ 1.317176] io scheduler deadline registered
[ 1.317193] io scheduler cfq registered (default)
[ 1.317251] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.317275] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.317279] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 1.317746] GHES: HEST is not enabled!
[ 1.317762] isapnp: Scanning for PnP cards...
[ 1.673389] isapnp: No Plug & Play device found
[ 1.673545] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.674167] Linux agpgart interface v0.103
[ 1.674217] i8042: PNP: PS/2 Controller [PNP0303:KBC,PNP0f03
S2M] at 0x60,0x64 irq 1,12
[ 1.674464] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.674506] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.674795] mousedev: PS/2 mouse device common for all mice
[ 1.674897] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.675246] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 1.675287] rtc0: alarms up to one day, y3k, 242 bytes nvram, hpet irqs
[ 1.675348] TCP: cubic registered
[ 1.675406] NET: Registered protocol family 10
[ 1.675486] Mobile IPv6
[ 1.675494] NET: Registered protocol family 17
[ 1.675508] Registering the dns_resolver key type
[ 1.675558] Using IPI No-Shortcut mode
[ 1.676191] PM: Hibernation image not present or could not be loaded.
[ 1.676220] registered taskstats version 1
[ 1.677043] rtc_cmos 00:03: setting system clock to 2017-07-12 21:17:12 UTC (1499894232)
[ 1.677121] Freeing unused kernel memory: 416k freed
[ 1.677143] Write protecting the kernel text: 3496k
[ 1.677150] Write protecting the kernel read-only data: 984k
[ 1.692100] udevd[49]: starting version 175
[ 1.705671] usbcore: registered new interface driver usbfs
[ 1.705686] usbcore: registered new interface driver hub
[ 1.708661] usbcore: registered new device driver usb
[ 1.712342] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.712409] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 1.713535] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 1.713559] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 1.713664] ehci_hcd 0000:00:1d.7: Enabling legacy PCI PM
[ 1.714628] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[ 1.714660] ehci_hcd 0000:00:1d.7: irq 19, io mem 0xef140000
[ 1.724379] SCSI subsystem initialized
[ 1.724827] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.724855] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.724858] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.724860] usb usb1: Product: EHCI Host Controller
[ 1.724862] usb usb1: Manufacturer: Linux 3.4-9-rtai-686-pae ehci_hcd
[ 1.724864] usb usb1: SerialNumber: 0000:00:1d.7
[ 1.725061] hub 1-0:1.0: USB hub found
[ 1.725066] hub 1-0:1.0: 15 ports detected
[ 1.725707] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.725774] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.726926] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.726935] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.728229] uhci_hcd 0000:00:1d.0: irq 18, io base 0x0000b200
[ 1.737785] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.737788] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.737791] usb usb2: Product: UHCI Host Controller
[ 1.737793] usb usb2: Manufacturer: Linux 3.4-9-rtai-686-pae uhci_hcd
[ 1.737795] usb usb2: SerialNumber: 0000:00:1d.0
[ 1.738723] hub 2-0:1.0: USB hub found
[ 1.738729] hub 2-0:1.0: 2 ports detected
[ 1.739132] virtio-pci 0000:00:05.0: enabling device (0000 -> 0003)
[ 1.749152] libata version 3.00 loaded.
[ 1.756596] virtio-pci 0000:00:0e.0: enabling device (0000 -> 0001)
[ 1.757761] virtio-pci 0000:00:0e.0: setting latency timer to 64
[ 1.761849] xhci_hcd 0000:00:1d.6: setting latency timer to 64
[ 1.762985] xhci_hcd 0000:00:1d.6: xHCI Host Controller
[ 1.762996] xhci_hcd 0000:00:1d.6: new USB bus registered, assigned bus number 3
[ 1.764101] xhci_hcd 0000:00:1d.6: cache line size of 64 is not supported
[ 1.764233] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.764236] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.764238] usb usb3: Product: xHCI Host Controller
[ 1.764240] usb usb3: Manufacturer: Linux 3.4-9-rtai-686-pae xhci_hcd
[ 1.764241] usb usb3: SerialNumber: 0000:00:1d.6
[ 1.765410] xHCI xhci_add_endpoint called for root hub
[ 1.765412] xHCI xhci_check_bandwidth called for root hub
[ 1.765442] hub 3-0:1.0: USB hub found
[ 1.765475] hub 3-0:1.0: 2 ports detected
[ 1.765690] xhci_hcd 0000:00:1d.6: xHCI Host Controller
[ 1.765697] xhci_hcd 0000:00:1d.6: new USB bus registered, assigned bus number 4
[ 1.765789] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[ 1.765791] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.765793] usb usb4: Product: xHCI Host Controller
[ 1.765795] usb usb4: Manufacturer: Linux 3.4-9-rtai-686-pae xhci_hcd
[ 1.765797] usb usb4: SerialNumber: 0000:00:1d.6
[ 1.766489] xHCI xhci_add_endpoint called for root hub
[ 1.766492] xHCI xhci_check_bandwidth called for root hub
[ 1.766523] hub 4-0:1.0: USB hub found
[ 1.766555] hub 4-0:1.0: 12 ports detected
[ 1.771389] microcode: CPU0 sig=0x40651, pf=0x1, revision=0x17
[ 1.776088] ata_piix 0000:00:1f.1: version 2.13
[ 1.778072] scsi0 : ata_piix
[ 1.794202] scsi1 : ata_piix
[ 1.794474] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xe000 irq 14
[ 1.794478] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xe008 irq 15
[ 1.799551] ahci 0000:00:1f.2: version 3.0
[ 1.799655] ahci: SSS flag set, parallel bus scan disabled
[ 1.799820] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
[ 1.799824] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led only slum part
[ 1.802313] scsi2 : ahci
[ 1.802409] scsi3 : ahci
[ 1.802473] scsi4 : ahci
[ 1.802643] scsi5 : ahci
[ 1.802723] scsi6 : ahci
[ 1.802802] scsi7 : ahci
[ 1.803648] ata3: SATA max UDMA/133 abar m8192@0xf0200000 port 0xf0200100 irq 16
[ 1.803654] ata4: SATA max UDMA/133 abar m8192@0xf0200000 port 0xf0200180 irq 16
[ 1.803657] ata5: SATA max UDMA/133 abar m8192@0xf0200000 port 0xf0200200 irq 16
[ 1.803660] ata6: SATA max UDMA/133 abar m8192@0xf0200000 port 0xf0200280 irq 16
[ 1.803663] ata7: SATA max UDMA/133 abar m8192@0xf0200000 port 0xf0200300 irq 16
[ 1.803665] ata8: SATA max UDMA/133 abar m8192@0xf0200000 port 0xf0200380 irq 16
[ 1.848474] microcode: CPU1 sig=0x40651, pf=0x1, revision=0x17
[ 1.850533] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 2.036410] usb 1-1: new high-speed USB device number 2 using ehci_hcd
[ 2.128693] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.128863] ata3.00: ATA-8: LinuxCNC-0 SSD, F.GDD60C, max UDMA/100
[ 2.128865] ata3.00: 134217728 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 2.129005] ata3.00: configured for UDMA/100
[ 2.129216] scsi 2:0:0:0: Direct-Access ATA LinuxCNC-0 SSD F.GD PQ: 0 ANSI: 5
[ 2.169298] usb 1-1: New USB device found, idVendor=203a, idProduct=fff9
[ 2.169301] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.169303] usb 1-1: Product: FaceTime HD Camera
[ 2.169305] usb 1-1: Manufacturer: Parallels
[ 2.169306] usb 1-1: SerialNumber: CC2527209C3F6VVDW
[ 2.296337] Refined TSC clocksource calibration: 2599.992 MHz.
[ 2.296366] Switching to clocksource tsc
[ 2.447600] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.447808] ata4.00: ATAPI: Virtual DVD-ROM [1], FWR1, max UDMA/25
[ 2.448085] ata4.00: configured for UDMA/25
[ 2.448576] scsi 3:0:0:0: CD-ROM Virtual DVD-ROM R103 PQ: 0 ANSI: 5
[ 2.767674] ata5: SATA link down (SStatus 0 SControl 300)
[ 3.086185] ata6: SATA link down (SStatus 0 SControl 300)
[ 3.406167] ata7: SATA link down (SStatus 0 SControl 300)
[ 3.725047] ata8: SATA link down (SStatus 0 SControl 300)
[ 3.730803] sd 2:0:0:0: [sda] 134217728 512-byte logical blocks: (68.7 GB/64.0 GiB)
[ 3.730806] sd 2:0:0:0: [sda] 4096-byte physical blocks
[ 3.730847] sd 2:0:0:0: [sda] Write Protect is off
[ 3.730849] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.730861] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.731936] sda: sda1 sda2 < sda5 >
[ 3.732323] sd 2:0:0:0: [sda] Attached SCSI disk
[ 3.733151] sr0: scsi3-mmc drive: 44x/44x cd/rw xa/form2 cdda tray
[ 3.733154] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 3.733447] sr 3:0:0:0: Attached scsi CD-ROM sr0
[ 3.734180] sd 2:0:0:0: Attached scsi generic sg0 type 0
[ 3.734295] sr 3:0:0:0: Attached scsi generic sg1 type 5
[ 8.796133] PM: Starting manual resume from disk
[ 8.796137] PM: Hibernation image partition 8:5 present
[ 8.796138] PM: Looking for hibernation image.
[ 8.796308] PM: Image not found (code -22)
[ 8.796309] PM: Hibernation image not present or could not be loaded.
[ 8.806561] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 9.044407] udevd[357]: starting version 175
[ 9.136054] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 9.136062] ACPI: Power Button [PWRF]
[ 9.136133] input: Sleep Button as /devices/LNXSYSTM:00/LNXSLPBN:00/input/input2
[ 9.136136] ACPI: Sleep Button [SLPF]
[ 9.196550] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 9.232226] i801_smbus 0000:00:1f.3: Enabling SMBus device
[ 9.233360] prl_tg: module license 'Parallels' taints kernel.
[ 9.233362] Disabling lock debugging due to kernel taint
[ 9.234409] Parallels Toolgate driver 1.3.0 loaded
[ 9.235449] detected Parallels ToolGate, base addr 00008000, IRQ 22
[ 9.235668] detected Parallels Video ToolGate, base addr 00006000, IRQ 21
[ 9.258173] ACPI: Battery Slot [BAT0] (battery present)
[ 9.260422] ACPI: AC Adapter [ADP0] (on-line)
[ 9.334255] intel8x0: enable Parallels VM optimization
[ 9.334264] snd_intel8x0 0000:00:1f.4: setting latency timer to 64
[ 9.390418] Linux media interface: v0.10
[ 9.395010] Linux video capture interface: v2.00
[ 9.416454] uvcvideo: Found UVC 1.00 device FaceTime HD Camera (203a:fff9)
[ 9.418435] usbcore: registered new interface driver uvcvideo
[ 9.418437] USB Video Class driver (1.1.1)
[ 9.708270] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input3
[ 9.774894] intel8x0_measure_ac97_clock: measured 54506 usecs (2688 samples)
[ 9.774897] intel8x0: clocking to 46720
[ 10.037705] Adding 1568764k swap on /dev/sda5. Priority:-1 extents:1 across:1568764k SS
[ 10.049873] EXT4-fs (sda1): re-mounted. Opts: (null)
[ 10.120082] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 10.154861] loop: module loaded
[ 10.898331] RPC: Registered named UNIX socket transport module.
[ 10.898336] RPC: Registered udp transport module.
[ 10.898338] RPC: Registered tcp transport module.
[ 10.898339] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 10.910997] FS-Cache: Loaded
[ 10.919636] NFS: Registering the id_resolver key type
[ 10.919728] FS-Cache: Netfs 'nfs' registered for caching
[ 10.925090] Installing knfsd (copyright (C) 1996
okir@monad.swb.de).
[ 11.514473] Parallels Linux shared folders filesystem driver 1.2.5 loaded
[ 12.178568] Bluetooth: Core ver 2.16
[ 12.180812] NET: Registered protocol family 31
[ 12.180816] Bluetooth: HCI device and connection manager initialized
[ 12.180818] Bluetooth: HCI socket layer initialized
[ 12.180819] Bluetooth: L2CAP socket layer initialized
[ 12.180833] Bluetooth: SCO socket layer initialized
[ 12.201551] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 12.201557] Bluetooth: BNEP filters: protocol multicast
[ 12.213929] Bluetooth: RFCOMM TTY layer initialized
[ 12.213934] Bluetooth: RFCOMM socket layer initialized
[ 12.213936] Bluetooth: RFCOMM ver 1.11
[ 12.321271] lp: driver loaded but no devices found
[ 12.351434] ppdev: user-space parallel port driver
[ 12.469345] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input4
[ 21.909343] usb 1-2: new high-speed USB device number 3 using ehci_hcd
[ 22.043297] usb 1-2: New USB device found, idVendor=203a, idProduct=fffa
[ 22.043301] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 22.043303] usb 1-2: Product: Virtual Printer (Print to PDF (Mac Desktop))
[ 22.043305] usb 1-2: Manufacturer: Parallels
[ 22.043307] usb 1-2: SerialNumber: TAG11d87aca0
[ 22.060067] usblp0: USB Unidirectional printer dev 3 if 0 alt 0 proto 1 vid 0x203A pid 0xFFFA
[ 22.060153] usbcore: registered new interface driver usblp
[ 23.212385] usblp0: removed
[ 23.223027] usblp0: USB Unidirectional printer dev 3 if 0 alt 0 proto 1 vid 0x203A pid 0xFFFA
[ 26.893446] I-pipe: head domain RTAI registered.
[ 26.893452] RTAI[hal]: compiled with gcc version 4.7.2 (Debian 4.7.2-5) .
[ 26.893866] RTAI[hal]: mounted (IPIPE-NOTHREADS, IMMEDIATE (INTERNAL IRQs DISPATCHED), ISOL_CPUS_MASK: 0).
[ 26.893870] SYSINFO: CPUs 2, LINUX APIC IRQ 2312, TIM_FREQ 6249609, CLK_FREQ 2600011000, CPU_FREQ 2600011000
[ 26.893873] RTAI_APIC_TIMER_IPI: RTAI DEFINED 2314, VECTOR 2314; LINUX_APIC_TIMER_IPI: RTAI DEFINED 2312, VECTOR 2312
[ 26.893879] TIMER NAME: lapic; VARIOUSLY FOUND APIC FREQs: 6249609, 6249609, 5243750
[ 26.910907] RTAI[malloc]: global heap size = 2097152 bytes, <BSD>.
[ 26.910956] , <uses LINUX SYSCALLs>, kstacks pool size = 524288 bytes.
[ 26.910959] RTAI[sched]: hard timer type/freq = APIC/6249609(Hz); default timing: oneshot; linear timed lists.
[ 26.910961] RTAI[sched]: Linux timer freq = 250 (Hz), TimeBase freq = 2600011000 hz.
[ 26.910962] RTAI[sched]: timer setup = 999 ns, resched latency = 2943 ns.
[ 26.924033] RTAI[math]: loaded.
[ 27.090289] usb 1-3: new high-speed USB device number 4 using ehci_hcd
[ 27.185546] RTAPI: ERROR: Unexpected realtime delay on task 1
[ 27.185548] This Message will only display once per session.
[ 27.185592] Run the Latency Test and resolve before continuing.
[ 27.226880] usb 1-3: New USB device found, idVendor=203a, idProduct=fffa
[ 27.226884] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 27.226886] usb 1-3: Product: Virtual Printer (HP Photosmart C5200 series)
[ 27.226888] usb 1-3: Manufacturer: Parallels
[ 27.226890] usb 1-3: SerialNumber: TAG1db100c1e
[ 27.231605] usblp1: USB Unidirectional printer dev 4 if 0 alt 0 proto 1 vid 0x203A pid 0xFFFA
[ 28.486228] usblp0: removed
[ 28.491558] usblp0: USB Unidirectional printer dev 3 if 0 alt 0 proto 1 vid 0x203A pid 0xFFFA
[ 28.494697] usblp1: removed
[ 28.501991] usblp1: USB Unidirectional printer dev 4 if 0 alt 0 proto 1 vid 0x203A pid 0xFFFA
[ 30.024001] usb 1-4: new high-speed USB device number 5 using ehci_hcd
[ 30.156885] usb 1-4: New USB device found, idVendor=203a, idProduct=fffa
[ 30.156888] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 30.156890] usb 1-4: Product: Virtual Printer (NOLA_CP3525)
[ 30.156891] usb 1-4: Manufacturer: Parallels
[ 30.156892] usb 1-4: SerialNumber: TAG1e86b1371
[ 30.157949] usblp2: USB Unidirectional printer dev 5 if 0 alt 0 proto 1 vid 0x203A pid 0xFFFA
[ 30.329500] RTAI[math]: unloaded.
[ 30.331106] SCHED releases registered named ALIEN PEDV$D
[ 30.335416] RTAI[malloc]: unloaded.
[ 30.435046] RTAI[sched]: unloaded (forced hard/soft/hard transitions: traps 0, syscalls 0).
[ 30.437273] I-pipe: head domain RTAI unregistered.
[ 30.438130] RTAI[hal]: unmounted.
Click to expand...
